Gold Racer

Gold Racer offers advanced gold prospecting capabilities. Operating at 56 kHz frequency, so it can detect the tiniest nuggets while ignoring harsh ground conditions and hot rocks in gold fields around the world.

Gold Racer From Nokta is a versatile device for many metal detection activities as it can be used to detect gold nuggets, coins, jewelry, and other metals.

VLF SYSTEM

– 3 Search Modes

1 – All Metal Mode:

It is the deepest mode of the device, different than the discrimination modes, so this mode features a threshold tone that is continuously heard in the background.

The device does not discriminate targets while in the All Metal mode and detects all targets (metal, mineralized rocks, etc.).

The ID of the detected target is shown on the display (except for negative hot rocks) then the same warning tone is provided for all targets.

The warning tone increases in pitch as the target is approached.

2 – Discrimination Mode -1 (DISC.1):

It is the 2-tone discrimination mode designed for tough gold fields with high mineralization or positive hot rocks. so It offers slightly less depth but faster target detection also a recovery speed in highly mineralized soils compared to the other modes

3 – Discrimination Mode -2(DISC.2):

It is the 2- tone discrimination mode designed for cleaner gold fields with milder mineralization. so It provides more depth compared to the DISC.1 mode.

-Digital Target ID & ID Filtering

Target ID is the number produced by the metal detector based on the conductivity of the metals so it gives an idea to the user about what the target may be.

Target ID is shown with two digits on the display and ranges between 01-99.

ID Filter is the ability of the device to ignore unwanted metals.

In other words, the detector will not provide a warning tone or a target ID

when such metals are detected.

Hence It provides ease of use by rejecting mineralized rocks (hot rocks) and metals such as iron and foil.

– Ground Balance Options

Gold Racer has three ground balance options as follows:

1 – Manual Ground Balance:

Allows you to manually modify the ground balance value, so It is not preferred mostly because it takes time.

However, it is the preferred option in cases where successful grounds balance cannot be performed using other methods or minor corrections are required to the automatic balance.

2 – Automatic Ground Balance:

Gold Racer is designed to allow for automatic ground balancing conveniently on any type of ground.

Therefore, it is recommended to perform automatic ground balance upon start up.

3 – Ground Tracking:

Tracking is suitable for use in areas where different soil structures are present within the same land, steep and broken fields or in fields ,where mineral rocks are scattered widely apart.

– Frequency Shift

It is the setting which enables to change the operating frequency of the device. so It is used to eliminate the electromagnetic signals that the device receives from

Easy to use single menu design

another detector which operates in the same frequency range nearby or from the surroundings.

If too much noise when the search coil  in the air receive, this is because by the surrounding electromagnetic signals or too much sensitivity.

– LED Flashlight

Use the LED flash light  for lighting the scanned area while performing search at night or dark locations. But LED flashlight does not operate when the device is off. so we recommend to turn it on when necessary since its operation consumes battery charge.

– Other Features

Operating at 56 kHz frequency

iSAT (Intelligent Self-Adjusting Threshold).

Tone Break.

Audio Boost.

Superior discrimination ability.

Pinpoint and Depth indicator.

Professional Design and super quality.

Waterproof search coil.

Optional Wireless 2.4 GHZ Headphones