Introduction
The Treasure Way Metal Detector is a deep-search detection system developed by GER Detect for locating large underground metal targets, buried valuables, and underground voids.
The device uses advanced Pulse Induction technology, designed to reduce the influence of small unwanted targets and soil impurities while focusing on larger and deeper targets. It also includes intelligent automatic calibration to improve performance in mineral-rich and rocky ground.
Treasure Way combines three important search functions in one device: Metal Detection, Void Detection, and Depth Determination. These systems allow the user to locate metal targets, identify underground cavities such as tunnels and caves, and estimate the depth of detected targets.
According to the official user manual, the detector is capable of reaching depths exceeding 4 meters under suitable conditions, including dense and mineralized soil.
In this complete guide, we will explain how the Treasure Way works, its Pulse Induction system, search modes, depth measurement, correct scanning technique, technical specifications, and practical tips for getting more accurate results.
Table of Contents
What Is the Treasure Way Metal Detector?
The Treasure Way Metal Detector is a deep-search metal and void detection system developed by GER Detect, designed to locate large and deep underground targets while reducing the response from small targets and soil impurities.
The detector uses Pulse Induction technology and is designed to reduce the influence of small targets and soil impurities, allowing the system to focus more effectively on larger and deeper buried targets. The official manual also states that Treasure Way includes intelligent automatic calibration to improve performance in mineral-rich rocks and difficult ground conditions.
Treasure Way combines three main detection functions in one device:
- Metal Detection System
- Void Detection System
- Depth Determination System
The Metal Detection System is designed to detect both precious and non-precious metals while using smart ground balancing to reduce the effect of mineral impurities.
The Treasure Way Metal Detector also works as an Underground Void Detector, with a dedicated system designed to identify caves, tombs, cellars, tunnels, and crypts.
The third function, the Depth Determination System, is used to estimate the depth of detected metals and underground voids, with the final result shown on the screen in centimeters.
Who Is the Treasure Way Metal Detector Designed For?
The Treasure Way Metal Detector is designed for users who are searching for larger and deeper underground targets rather than very small surface objects.
Its Pulse Induction system is specifically described in the official manual as being designed to reduce the response from small targets and soil impurities, while focusing more on large, deep targets such as buried treasures and valuable items.
This makes the device especially suitable for:
- Treasure hunters searching for large buried metal objects
- Users working in mineralized or rocky ground
- Searchers looking for deep metal targets
- Users investigating underground voids
- Searchers looking for caves, tunnels, tombs, cellars, and crypts
- Users who need target depth estimation before excavation
The detector is also designed to operate in different terrain conditions and is supported by an intelligent automatic calibration system intended to improve performance in mineral-rich ground.
Because Treasure Way includes separate systems for metal detection, void detection, and depth determination, it is more suitable for users who want a broader underground investigation tool rather than a detector focused only on basic metal identification.
Treasure Way Pulse Induction Technology
One of the key technologies behind the Treasure Way Metal Detector is its advanced Pulse Induction system.
According to the official manual, this system is designed to reduce the response from small targets and soil impurities so the detector can focus more effectively on larger and deeper underground targets.
This is especially important in difficult search environments, where mineralization and unwanted ground responses can make target identification more challenging.
The Treasure Way also includes an intelligent auto-calibration system intended to improve performance when searching through mineral-rich rocks and difficult ground conditions.
The official manual further explains that the detector is designed to work efficiently across different types of terrain and provide real-time signal response during the search.
Why Pulse Induction Matters on Treasure Way
The Pulse Induction system gives Treasure Way a clear focus on deep-search applications.
Instead of being optimized mainly for tiny surface targets, the system is designed around larger buried targets and deep-search situations.
This makes it particularly relevant for users searching for:
- Large buried metal objects
- Deep treasure targets
- Valuable underground items
- Targets in mineralized soil
- Targets in rocky ground
The manual also states that the detector can reach depths exceeding 4 meters under suitable conditions, including dense and mineralized soil.
Metal Detection System
The Metal Detection System is one of the main search modes in the Treasure Way Metal Detector.
According to the official manual, this system is designed to detect both precious and non-precious metals while using smart ground balancing technology to reduce the effect of mineral impurities and improve detection accuracy.
To activate the system, the user selects the Metal Detection option from the main screen. During the search, the detector should be moved in a balanced side-to-side motion while the user walks in a straight line.
When the detector receives a target signal, a red indicator gradually appears on the screen together with a percentage that represents signal strength. The response is also accompanied by a distinctive sound.
The user can also adjust the sensitivity level according to the soil conditions and the type of target being searched for.
How the Metal Detection System Works in Practice
For best results, the search coil should remain close and parallel to the ground while scanning.
The manual also emphasizes that the coil should not be moved erratically or pressed excessively against the ground, because improper scanning can reduce detection accuracy.
During a proper scan:
- Walk in a straight line
- Sweep the coil evenly from side to side
- Keep the movement balanced and consistent
- Monitor the red target indicator
- Watch the signal-strength percentage
- Adjust sensitivity when necessary
This system is particularly useful when searching for larger underground metal targets where a strong and stable response is needed before moving to depth measurement.
Void Detection System
The Void Detection System is designed to identify underground empty spaces and structures that may not produce the same response as a metal target.
According to the official Treasure Way manual, this system can be used to detect caves, tombs, cellars, tunnels, and crypts.
To activate it, select Detect Voids from the home screen. Once the system opens, the device begins an automatic calibration process before the search starts.
When the detector identifies a possible void, a blue indicator gradually appears on the screen, together with a percentage showing signal strength and a distinctive audio response.
The user can also adjust the sensitivity level from the control icon on the screen to better match the search conditions.
What Can the Void Detection System Find?
The official manual lists the following underground structures:
- Caves
- Tombs
- Cellars
- Tunnels
- Crypts
This makes the system useful when the search objective is not only metal detection, but also locating underground cavities or man-made spaces.
Important Scanning Note
The manual specifically warns that improper scanning may result in missed targets or false signals.
For that reason, consistent coil movement, correct calibration, and proper sensitivity settings are important when using the Void Detection System.
Depth Determination System
The Depth Determination System is designed to estimate the depth of a detected metal target or underground void after the target has already been located.
According to the official Treasure Way user manual, this system provides a depth estimate for underground metals and voids and displays the final result in centimeters.
How to Measure Target Depth
The process starts by pressing the red Capture button in the center of the screen.
A graphic then appears showing the direction in which the search coil should be moved over the target. The user sweeps the coil horizontally across the target area until the device emits a signal.
Continue sweeping until the sound stops, then press the Capture button again. After locating the target correctly, select the Depth option on the search screen.
The system then guides the user through the final measurement steps. Once the scan is completed, the result appears on the screen showing the estimated target depth in centimeters.
Why This System Is Important
The depth function adds another layer of information after target detection.
Instead of only knowing that a target or void is present, the user can also obtain an estimated depth before deciding whether to investigate the area further.
For deep-search applications, this can be useful when evaluating whether a target is close to the surface or located much deeper underground.
Important Use Note
The quality of the depth estimate depends on correct target positioning and proper coil movement.
The manual instructs the user to move the coil horizontally over the target and follow the on-screen direction graphics carefully during the measurement process.
How Deep Can the Treasure Way Metal Detector Detect?
According to the official user manual, the Treasure Way Metal Detector is capable of detecting at depths exceeding 4 meters under suitable search conditions, including dense and mineralized soil.
This depth specification is one of the main reasons the detector is positioned as a deep-search system rather than a detector focused primarily on small, shallow targets.
The manual does not provide a fixed guaranteed depth for every target type. Instead, it emphasizes that correct operation, soil conditions, calibration, interference levels, and scanning technique all affect detection performance.
Treasure Way Detection Systems Overview
| System | Main Function | What It Detects |
|---|---|---|
| Metal Detection System | Detects underground metal targets | Precious and non-precious metals |
| Void Detection System | Detects underground empty spaces | Caves, tombs, cellars, tunnels, and crypts |
| Depth Determination System | Estimates target depth | Metals and underground voids |
Treasure Way Key Specifications
| Feature | Specification |
|---|---|
| Detection Technology | Pulse Induction |
| Detection Depth | Over 4 meters under suitable conditions |
| Search Coil | 45 cm |
| Display | 4.3-inch TFT LCD Touch Panel |
| Battery Runtime | Up to 10 hours |
| Languages | English, German, French, Spanish, Persian, Arabic |
| Coil Waterproof Rating | Up to 30 cm |
| Detector Body | Weatherproof, not waterproof |
What Affects Detection Depth?
Several factors can influence the practical depth achieved during a search.
These include:
- Target size
- Target type
- Soil mineralization
- Ground conditions
- Sensitivity settings
- Calibration quality
- Coil movement
- Nearby electrical or metal interference
The manual specifically warns that improper use or excessive noise interference may reduce the device’s ability to confirm a target and determine its depth accurately.
Deep Targets in Mineralized Ground
Treasure Way includes an intelligent auto-calibration system intended to improve performance in mineral-rich rocks and difficult ground conditions.
Its Pulse Induction system is also designed to reduce the effect of small unwanted targets and soil impurities, helping the detector focus more effectively on larger and deeper targets.
Depth Detection vs Depth Measurement
It is important to distinguish between two different functions:
Detection depth refers to how deep the detector may be able to locate a target.
Depth measurement refers to the dedicated Depth Determination System, which estimates the depth of a detected target and displays the final result in centimeters.
These are related, but they are not the same thing.
How to Use the Treasure Way Metal Detector
Using the Treasure Way Metal Detector correctly begins with proper assembly, calibration, and coil positioning.
Before starting any search, the official manual recommends making sure the battery is fully charged, all components are connected correctly, and the device is being used away from sources of interference such as power lines, mobile phones, electronic equipment, and nearby metal objects.
Step 1: Assemble the Detector
Start by inserting the detector arm into its designated position and tightening it securely.
The arm can then be extended to a comfortable length using the locking mechanisms. Make sure all locks are properly closed before beginning the search.
Next, attach the main control unit to the arm handle and secure the battery to the base of the armrest.
Connect the battery cable to the correct port on the main unit.
Finally, connect the search coil to the lower shaft using the plastic screw, wrap the coil cable around the arm, and connect the cable to the search coil port on the main unit.
Step 2: Power On the Device
Turn on the Treasure Way using the power button located on the rear of the main control unit.
The manual then instructs the user to gently position the search coil close to the ground and keep it parallel to the surface before activating the battery.
Step 3: Allow Automatic Calibration
Before entering any search system, the search coil must remain pointed toward the ground so the device can complete its automatic calibration process.
This calibration step is especially important when searching in mineralized ground because Treasure Way uses smart ground balancing and automatic calibration to reduce interference from soil mineralization.
Step 4: Keep the Coil Parallel to the Ground
During the search, keep the coil close to the ground and move it in a steady, parallel motion.
Avoid excessive contact between the search coil and the ground, because uncontrolled movement or incorrect positioning may reduce search accuracy.
Step 5: Select the Search System
From the main interface, select the system that matches your search objective:
- Metal Detection for underground metal targets
- Detect Voids for underground cavities and structures
- Depth Determination after a target has been located
Each search mode has its own calibration, sensitivity, and signal response controls.
Correct Scanning Technique with Treasure Way
Correct scanning technique is essential for getting reliable results from the Treasure Way Metal Detector. The official manual repeatedly emphasizes stable coil movement, proper calibration, and avoiding excessive contact with the ground.
During the search, the coil should remain close and parallel to the ground while the user moves it from side to side in a balanced and consistent manner. The user should also walk in a straight line rather than making sudden changes in direction.
Correct Coil Movement
For better results:
- Keep the search coil close to the ground
- Maintain a parallel position to the surface
- Sweep from side to side smoothly
- Keep the movement balanced and consistent
- Walk in a straight line
- Avoid sudden changes in angle or height
- Do not drag or press the coil heavily against the ground
The manual warns that improper scanning can lead to missed targets or false signals, especially when using the Void Detection System.
Correct vs Incorrect Scanning
| Correct Scanning | Incorrect Scanning |
|---|---|
| Coil remains parallel to the ground | Coil is tilted during movement |
| Smooth side-to-side sweep | Fast or irregular swinging |
| Consistent search height | Constantly changing coil height |
| Straight walking line | Sudden changes in direction |
| Stable movement | Jerky or uncontrolled motion |
| Light movement above the ground | Excessive contact with the ground |
Why Scanning Technique Matters
Treasure Way relies on signal strength, calibration, sensitivity, and ground balancing to identify targets correctly.
If the coil is moved too quickly, too high, or at an inconsistent angle, the device may receive weaker or unstable signals.
The manual also states that excessive interference or incorrect use may reduce the device’s ability to confirm a target and determine its depth accurately.
Adjusting Sensitivity
The Metal Detection and Void Detection systems both include sensitivity controls.
The sensitivity level can be adjusted according to the soil conditions and the target being searched for.
Higher sensitivity is not always better. The goal is to use a setting that provides a stable signal without excessive noise.
Treasure Way Performance in Mineralized Soil
One of the most important strengths of the Treasure Way Metal Detector is its ability to work in difficult ground conditions, especially areas with high mineral content.
According to the official user manual, the detector includes an intelligent auto-calibration system designed to improve its ability to penetrate mineral-rich rocks and operate more effectively in challenging terrain.
The Metal Detection System also uses smart ground balancing technology, which helps reduce the effect of mineral impurities and improve target detection accuracy.
Why Mineralized Soil Is Challenging
Mineralized ground can create unwanted responses and interfere with metal detection signals.
Treasure Way is designed to reduce this problem by combining:
- Automatic calibration
- Smart ground balancing
- Pulse Induction technology
- Adjustable sensitivity
These features help the detector stay more stable and focus on larger, deeper targets instead of reacting strongly to soil impurities.
Detection Depth in Difficult Ground
The official manual states that Treasure Way can reach depths exceeding 4 meters, including in dense or mineralized soil, under suitable search conditions.
This makes the detector particularly relevant for users working in rocky or mineral-rich areas where conventional detectors may be more affected by ground conditions.
Recommended Settings in Mineralized Areas
The manual does not provide one fixed sensitivity value for all mineralized soils. Instead, it allows the user to adjust sensitivity according to the soil and target conditions.
For this reason, the best approach is to:
- Allow the device to complete automatic calibration
- Keep the coil stable and parallel to the ground
- Adjust sensitivity gradually
- Avoid excessive interference from nearby electronics and metals
- Recheck unstable signals before confirming a target
Mineralized Soil Performance Summary
| Feature | Benefit in Mineralized Soil |
|---|---|
| Auto Calibration | Helps adapt the detector to ground conditions |
| Smart Ground Balance | Reduces the influence of mineral impurities |
| Pulse Induction | Focuses more on larger and deeper targets |
| Sensitivity Control | Allows adjustment based on soil conditions |
| Deep Search Capability | Designed to work at depths exceeding 4 meters under suitable conditions |
Treasure Way User Interface and Controls
The Treasure Way Metal Detector uses a touchscreen interface designed to give the user quick access to the main search systems and device settings.
According to the official manual, the user interface includes controls for time adjustment, volume, screen brightness, language selection, Metal Detection, Void Detection, and general settings, while the battery status and current time remain visible on the screen.
Main Interface Functions
| Control | Function |
|---|---|
| Metal Detection | Activates the metal search system |
| Void Detection | Activates the underground void search system |
| Settings | Opens device configuration options |
| Brightness | Adjusts display brightness |
| Volume | Controls sound level |
| Language | Changes the interface language |
| Time | Adjusts the displayed time |
| Battery Status | Shows remaining battery level |
Touchscreen Display
The Treasure Way uses a 4.3-inch TFT LCD touchscreen with a resolution of 480 × 272 pixels.
The screen displays the target response visually during searching, including signal strength percentages, system indicators, sensitivity controls, and calibration functions depending on the selected mode.
Sensitivity Controls
Both the Metal Detection and Void Detection systems provide sensitivity adjustment controls.
In Metal Detection mode, sensitivity can be changed according to the soil and the target being searched for.
The Void Detection interface also includes sensitivity controls to adapt the system to the search conditions.
Calibration Control
The search interfaces include a calibration function that allows the device to adjust to the surrounding ground conditions.
The manual states that calibration takes place automatically before searching, while the interface also provides a calibration control during operation.
Multilingual Interface
Treasure Way supports six languages:
- English
- German
- French
- Spanish
- Persian
- Arabic
This makes the detector easier to operate for users in different regions, particularly in the Middle East where Arabic language support is useful.
Treasure Way Technical Specifications
The Treasure Way Metal Detector combines deep-search Pulse Induction technology with a 4.3-inch touchscreen, a large search coil, and an external rechargeable battery designed for extended field use.
According to the official user manual, the detector operates at a 500 Hz Pulse Induction frequency and uses a 72 MHz data processing speed. The system includes a 45 cm search coil, which is intended for larger and deeper targets.
Main Technical Specifications
| Specification | Treasure Way |
|---|---|
| Detection Technology | Pulse Induction |
| PI Frequency | 500 Hz |
| Display | 4.3-inch TFT LCD |
| Touch Panel | Resistive |
| Display Resolution | 480 × 272 |
| Data Processing Speed | 72 MHz |
| Search Coil Diameter | 45 cm |
| Battery Type | External rechargeable Li-ion |
| Battery Voltage | 11.1 VDC |
| Battery Capacity | 55.5 Wh |
| Operating Time | Up to 10 hours |
| Coil Waterproof Rating | Up to 30 cm |
| Detector Waterproof Rating | Weatherproof only, not waterproof |
| Closed Length | 920 mm |
| Open Length | 1410 mm |
| Main Unit Length | 174 mm |
Audio System
The Treasure Way includes a built-in dynamic speaker and also supports headphones.
The official specifications list an audio frequency range of 350–1500 Hz and a sound output of approximately 84 ± 3 dB.
Operating and Storage Conditions
The detector is designed to operate across a wide range of field conditions.
| Condition | Specification |
|---|---|
| Operating Temperature | 0°C to 70°C |
| Operating Humidity | Up to 95% non-condensing |
| Storage Temperature | -20°C to 70°C |
| Storage Humidity | Up to 98% relative humidity |
Battery Specifications
The system uses an external rechargeable Li-ion battery.
According to the manual:
- Voltage: 11.1 VDC
- Capacity: 55.5 Wh
- Runtime: Up to 10 hours
- Battery operating temperature: 0°C to 50°C
- Battery storage temperature: -5°C to 70°C
Waterproof and Weather Protection
The search coil is rated for water exposure up to approximately 30 cm, while the detector itself is not waterproof and should be treated as weatherproof only.
This distinction is important during field use: the coil can tolerate limited shallow-water exposure, but the main electronic unit should be protected from rain and direct water contact.
Treasure Way Accessories and Package Contents
The Treasure Way Metal Detector package includes the main components required for field operation, transportation, charging, and audio monitoring.
According to the official user manual, the standard package includes:
- Main Control Unit
- Search Coil
- Device Arm
- External Battery
- Carrying Bag
- Headphones
- Wall Charger
- Car Charger
- Warranty Card
Package Contents Overview
| Accessory | Purpose |
|---|---|
| Main Control Unit | Operates the detector and displays search information |
| Search Coil | Performs the ground scanning and target detection |
| Device Arm | Supports the control unit and search coil |
| External Battery | Powers the detector during field use |
| Carrying Bag | Protects and transports the device |
| Headphones | Allows clearer audio monitoring |
| Wall Charger | Charges the battery from a standard power source |
| Car Charger | Allows charging from a vehicle |
| Warranty Card | Provides warranty information |
Search Coil
The Treasure Way package includes a 45 cm search coil, which is one of the key components of the detector.
The coil connects to the lower shaft using the provided fastening screw, while the cable is wrapped along the detector arm and connected to the designated port on the main control unit.
According to the technical specifications, the search coil is waterproof to a depth of approximately 30 cm.
External Battery
Treasure Way uses an external rechargeable Li-ion battery.
The battery is mounted at the base of the armrest and connected directly to the main unit.
The official specifications list a battery capacity of 55.5 Wh with an operating time of up to 10 hours.
Advantages of the Treasure Way Metal Detector
The Treasure Way Metal Detector combines deep-search Pulse Induction technology with dedicated systems for metal detection, void detection, and depth measurement.
One of its main strengths is its focus on large and deep underground targets, rather than only small shallow objects. The official manual states that the Pulse Induction system is designed to reduce the response from small targets and soil impurities while focusing more effectively on larger and deeper targets.
Other important advantages include:
- Pulse Induction technology for deep-search applications
- Smart ground balancing
- Intelligent auto-calibration
- Metal Detection System
- Void Detection System
- Depth Determination System
- Adjustable sensitivity
- 45 cm search coil
- Up to 10 hours of operating time
- Multilingual interface
- 4.3-inch touchscreen
- Designed for mineralized and difficult ground conditions
The manual also states that the detector can reach depths exceeding 4 meters under suitable conditions, including dense and mineralized soil.
Important Operating Tips
For better results with Treasure Way, the official manual recommends careful preparation and consistent scanning technique.
Before searching, make sure the battery is fully charged and all components are connected correctly. The detector should also be kept away from strong interference sources such as mobile phones, electronic devices, nearby metals, and power sources.
During scanning:
- Keep the search coil close and parallel to the ground
- Use smooth and balanced side-to-side movements
- Avoid excessive contact between the coil and the ground
- Allow the device to complete calibration before searching
- Adjust sensitivity according to the soil and target
- Recheck weak or unstable signals before confirming a target
The manual specifically warns that improper scanning or excessive interference can reduce the device’s ability to confirm a target and determine its depth accurately.
Treasure Way Warranty
According to the official user manual, the main unit is covered by a two-year warranty against electronic malfunctions.
The warranty does not cover damage caused by misuse, drops, unauthorized opening of the unit, or physical impact.
The battery, charger, and tablet are not included in the warranty coverage.
Is Treasure Way a Pulse Induction metal detector?
Yes. The official manual states that Treasure Way uses an advanced Pulse Induction system designed to reduce the influence of small targets and soil impurities while focusing more on large and deep targets.
How deep can the Treasure Way Metal Detector detect?
According to the official manual, Treasure Way can reach depths exceeding 4 meters under suitable conditions, including dense and mineralized soil.
Can Treasure Way detect gold?
The Metal Detection System is designed to detect both precious and non-precious metals. The manual does not state that the device identifies gold specifically as a unique metal type, so it is more accurate to describe it as a detector for precious and non-precious metals.
Can Treasure Way detect underground voids?
Yes. Treasure Way includes a dedicated Void Detection System designed to detect caves, tombs, cellars, tunnels, and crypts.
Can Treasure Way measure target depth?
Yes. The Depth Determination System estimates the depth of detected metals and voids and displays the final result in centimeters.
Does Treasure Way work in mineralized soil?
Yes. The manual describes an intelligent auto-calibration system and smart ground balancing intended to improve performance in mineral-rich and difficult ground conditions.
What size is the Treasure Way search coil?
The official technical specifications list a 45 cm search coil.
How long does the Treasure Way battery last?
The official manual lists an operating time of up to 10 hours.
Is the Treasure Way waterproof?
The search coil is waterproof to approximately 30 cm, but the detector itself is listed as weatherproof only, not waterproof.
How many languages does Treasure Way support?
The interface supports six languages: English, German, French, Spanish, Persian, and Arabic.
Where to Buy the Treasure Way Metal Detector
For more information about the Treasure Way Metal Detector, current availability, specifications, and ordering options, visit the official product page at Detectors Shop:
https://detectors-shop.com/product/treasure-way/
You can also review manufacturer information from UIG Detectors:
https://uigdetectors.com/product/treasure-way-metal-detector/
Final Verdict
The Treasure Way Metal Detector is designed for users who need a deep-search system focused on large underground metal targets and voids.
Its combination of Pulse Induction technology, automatic calibration, smart ground balancing, metal detection, void detection, and depth determination gives it a broader role than a conventional shallow-search detector.
The official manual states that Treasure Way can operate at depths exceeding 4 meters under suitable conditions, including dense and mineralized soil, while also providing a dedicated system for estimating target depth in centimeters.
Its 45 cm search coil, 4.3-inch touchscreen, sensitivity controls, multilingual interface, and up to 10 hours of battery life make it a serious option for users searching for larger and deeper underground targets in challenging terrain.
For users looking for a detector that combines deep metal detection, underground void detection, and depth measurement, Treasure Way offers a practical all-in-one search platform.
Final CTA
Explore the Treasure Way Metal Detector
View full specifications, availability, and ordering information:
